2K Epoxy Panel Bond
Two-component structural epoxy adhesive showing high chemical and heat resistance, for bonding steel, SMC, aluminium, composite materials and many other substrates
Description
Based on epoxy resins –for improved stiffness and light weight designBond line thickness is controlled by 0.25mm glass beads –no need to manually control the minimum bond line thicknessSpot weldable before full cure –no need to wait 24 hours before weldingSandable and paintableWithstands automotive e-coat, powder prime and paint oven temperatures up to 230°C –very resistant to heat and chemicalsUnique anti-corrosion formulation –ideal for hybrid assemblies of metal with different substratesHigh energy absorption and very good crash performance –approved by TÜV Rheinland
Additional information
| Color | Black |
|---|---|
| Content | 220 ml (side-by-side patroon) 195 ml (coaxiale patroon) |
Application
2K Epoxy Panel Bond provides versatility in use across a broad range of assembly requirements, from body panels, such as roofs and front fenders, to closures, such as doors, trunks, and hoods.2K Epoxy Panel Bond offers excellent adhesion on a wide variety of substrates such as CFRP (carbon fibre reinforced plastic), SMC (sheet moulding composite), FRP (fibreglass reinforced plastic), ABS, aluminium, galvanized steel, cold rolled steel, etc. For hybrid assemblies of two different metals, 2K Epoxy Panel Bond distinguishes itself with excellent corrosion protection and impact toughness.2K Epoxy Panel Bond facilitates a high degree of relative motion in the joint, e.g. in the particular case of dissimilar materials bonded to each other, showing different thermal expansion coefficients.
Manuals
1. Clean surfaces with KENT Acrysol or Soft Surface Cleaner and allow to dry.2. Sand the surfaces lightly and degrease.3. Before attaching the nozzle, balance the cartridge by extruding just enough product of part A and part B.4. Attach the nozzle. Extrude and dispose of the first 2 or 3 cm of the product. Apply KENT 2K Epoxy Panel Bond as required on both surfaces to be bonded. The bond line thickness is controlled by 0,25 mm glass beads contained in the adhesive. Open time: 60 minutes * / Working time: 90 minutes*. During working time the already joined parts can still be re-positioned. Do not take the bonded assembly apart.5. Clamp the panel for at least 4 hours *. Cure time can be accelerated (max. 150°C).6. Allow 24 hours * to achieve full strength.* 23°C / 55% R.H.N.B. Due to its high viscosity, the product can be best extruded at room temperature. If stored at low temperatures, it may help to warm up the cartridge before using.
Your challenge – our solutions
