Description
3-in-1 Saves Time –Triple-action : abrades, cleans and completely degreasesConsistent even key –enhances coating adhesion by creating smooth even surface preventing any ‘swelling’ in blend areas. Prevents problems of scratches or tramlines that can sometimes appear through the clear coatEasy to apply –Works fast in ideal combination with nylon finishing pads maintaining consistent abrasive actionCan be used with pure cotton cloth for areas around trim or under sealsCorners and crevices –Uniform matting and cleaning action gives the perfect key in hard-to-reach areas / e.g: doorjambs and sills, drip channels, door locks, handles etc.Water-based –Easy to wipe off & no residues to impair paint adhesionNo problems –Non-staining on rubber mouldings or trimsSilicone free
Additional information
| Color | Grey |
|---|---|
| Content | 362 ml |
Application
One-Step water based abrasive cleaning and preparation system for preparation of panels for painting, for blending-in of new paintwork when carrying out local repairs and for clear coat preparation.
Instructions
1. Shake well before use.2. Wash away from surface area any large dirt particles that can cause scratches.3. Using clean water, dampen the nylon’ hand pad wring-out any excess water.4. Apply Abraprep to hand pad or direct to panel (allowing approximately 10gms. per average sized panel).5. Using medium to firm pressure abrade surface using even pad strokes in a criss-cross action, until the panel is thoroughly cleaned and the desired matt finish is obtained.6. Remove any residues using Kent Finishing cloths.7. Then wipe abraded surface with a damp cloth, to remove any residues.8. Then follow regular painting process.
Your challenge – our solutions
