Air Co Cleaner

Foam cleaner and disinfectant for AC systems of vehicles


Category

Description

Unique foaming action –works directly on the evaporator
Excellent cleaning and biocidal properties –eliminates bacteria and yeasts from air-conditioning systems
Fast acting –saves time and money
Lasting protection –prevents the formation of unpleasant odors caused by micro-organisms on the evaporator
Low odour solvents –vehicle can be quickly returned to the customer

Additional information
Color White
Content 250 ml

Application

KENT Air Co Cleaner is formulated to clean the evaporator of the air-conditioning system in a vehicle. The unique clinging foam action ensures fast, effective cleaning and eliminates bacteria and yeasts in the system.
If air conditioning systems are not maintained, particularly around the evaporator, deposits quickly build up. KENT Air Co Cleaner sprays a clinging foam, via the extra long extension nozzle, direct into the heart of the system, where the foam will revert to liquid and drain away the contamination via the drain tubes.
N.B.: Additional use of KENT Air Co One Shot will protect and eliminate bacteria and yeasts from the ventilation pipes.

Manuals

1. Remove pollen air filter.
2. Open the windows / doors of the car to allow good ventilation.
3. Turn off the air-conditioning system. Switch ventilation to re-circulation mode.
4. Start the engine.
5. Set the temperature selector to the highest level and the air distribution to the footwell. Set fan switch to full power to help the evaporator dry out. Turn off power after 5 minutes.
6. Remove glove box and trim cover located under the glove box to access blower motor if needed. Disassemble the housing of the blower motor or remove the blower motor if needed.
7. Shake can well and attach the extension tube. Insert the tube through the evaporator core or the blower fan. Insert the tube as far as possible in order to reach the evaporator.
8. Spray the complete contents of the can on the evaporator and allow the product to work for 15 minutes. Do not switch the engine on during this lapse of time.
9. Install a new pollen air filter. Replace blower fan (if needed), housing, trim cover and glove box. Set the fan switch to low power and allow the remainder of the product to leave the drain tube.
10. For the best result, don’t use the air-conditioning for several hours.
N.B.:
Please adapt the instructions to the design of the vehicle’s air conditioning system.
Avoid breathing the fumes during use of the product.
A vehicle that smells of solvent should not be returned to use. Ventilate the vehicle accordingly.

Use biocides safely. Always read the label and product information before use.

Your challenge – our solutions

Improve & Protect

Additives
Lubricants

More info

Bond & Seal

Bond & Seal

Adhesives
Sealants
Adhesive tapes

More info

Color & Coat

Color & Coat

Levelling compounds
Primers
Fillers
Coatings
Paints

More info

Clean & Care

Cleaners
Polishes & Sealants
Care products
Disinfection & Odour remover

More info

Apply & Equip

Apply & Equip

Accessories
Equipment
Consumables

More info