DS Sponges
Double-sided sponges for manual sanding and matting of edges and contours of panels
Description
- Lasts 3x longer than conventional abrasive sponges – saves money and reduces wastage
- 3 versions available – choice for each fine sanding job
- Will not clog or gum on 2 sanding sides – offers the maximum performance to the user
- Does not mark – ensures good finish for next working step
- Flexible sponge pad – follows the substrate irregularities and body contours
- Versatile – can be used wet or dry, best results obtained when used dry
Additional information
| Color | Green Purple Brown Assorted |
|---|---|
| Content | 30 PC; Superfine P600/1000 30 PC; Microfine P1000/1500 30 PC; Fine P320/500 30 units, 10x A1467, 10x A1468, 10x A1469 |
Application
DS Sponges are double-sided (DS) sanding sponges with aluminium oxide and silicon carbide on both sides and a highly flexible foam backing. They are ideal for manual sanding as the thick foam structure absorbs hand pressure and prevents the marks and deep scratches left by plain abrasives with denser backings.
They can be used where machine sanding is not possible and are easy to use on profiled surfaces without the risk of peeling edges, giving an excellent surface finish.
DS Sponges are available in three grit sizes:
- DS Sponge FINE — BROWN
Aluminum oxide, silicon carbide P320/500*
Recommended for sanding electrophoresis and old lacquer layers, refinish sanding before primer filler spraying - DS Sponge SUPERFINE — GREEN
Aluminium oxide, silicon carbide P600/1000*
Recommended for sanding electrophoresis and old lacquer layers, filler sanding before basecoat spraying - DS Sponge MICROFINE — PURPLE
Aluminium oxide, silicon carbide P1000/1500*
Recommended for preparation of lacquered surfaces, clear coat fading
*P grit values are approximate and provide a general guideline for the coarseness or fineness of abrasive particles on sanding paper, as defined by the Federation of European Producers of Abrasives (FEPA).
The final refinish result will always depend on the pressure applied.
DS Sponges are also available as a set of 10 sponges of each grit (30 sponges in total).
Manuals
- Select the right DS Sponge for the job.
- Place the sponge on the surface and start sanding.
- When the first side of the sponge has reached the end of its life, turn it around and start using the second side.
- When both sides of the DS Sponge have reached the end of their life, replace it with a new one.
Your challenge – our solutions
