Epoxy Primer
Multi-purpose primer with excellent adhesion preventing corrosion on aluminium, anodised aluminium, sheet steel and zinc coated steel
Description
- Excellent adhesion and protection – product does not run and prevents corrosion
- Fast drying – overpaintable after 12 – 15 minutes at 20 °C
- Good flow – smooth finish
- Compatible with leading paint systems – use with confidence
- Wet-on-wet application possible –saves time
- 10 year shelf life (10 – 25 °C, max. 60% humidity) – long storage life
Additional information
Color | Grey |
---|---|
Content | 500 ml |
Application
Epoxy Primer is a 1K primer that provides excellent adhesion and corrosion protection. Its fast drying time makes it ideal for spot repairs and refinishing parts. It is also weldable and you can apply putty on the primer.
Epoxy Primer is characterised by good flow properties and can be applied wet-on-wet. It provides good insulation against moisture and it is compatible with water and solvent based products.
Can be used on aluminium, anodised aluminium, sheet steel, zinc coated steel, bare metal, glass fibre and plastic substrates (plastic primer recommended).
Manuals
- Remove rust, dirt, grease, dust and other contaminants. Surface must be clean and dry.
- Shake well to loosen the mixing ball, then continue shaking for 2 minutes.
- Apply several thin coats in a sweeping motion. Keep a distance of approx. 20 – 25 cm from the surface.
- After use, turn can upside down and spray to clean valve.
- Overpaintable after 12 – 15 minutes at 20 °C or 8 – 10 minutes using IR drying.