Etch Primer
Ready-to-use chromate-free etch primer for use on bare metal surfaces with anti-corrosion properties
Description
- 1K product – no mixing required, easy to use
- Excellent adhesion to most metal surfaces – wide range of applications
- Compatible with most leading paint systems – reliable application, no complaints
Additional information
| Color | Light grey |
|---|---|
| Content | 450 ml |
Application
KENT Etch Primer is used to prepare bare metal surfaces for painting ensuring a strong bond between the metal and subsequent paint layers. It is chromate-free and thanks to its high zinc phosphate concentration, this one-component etch primer offers the best corrosion protection.
KENT Etch Primer can be applied to bare steel, aluminium, galvanised and zinc coated steel, fully cured paint, polyester body fillers and glass fibre reinforced plastics (GRP).
Manuals
- Thoroughly clean and degrease the surface with a suitable detergent such as KENT Acrysol.
- Sand wet or dry with P280 – P320 abrasive.
- Clean, dry and degrease again.
- Shake can well for at least 2 minutes before use.
- Apply 1 – 2 light even coats.
- Allow 3 – 5 minutes flash-off between coats.
- Allow 10 – 20 minutes before overcoating.
Your challenge – our solutions
