Exhaust Paste
Exhaust Paste is a one part dual heat and air cure system based on a modified Silicate Cement. It is used when assembling exhaust components together to give leak free joints.
Description
Safe to use –asbestos Free Wide operating temperature –-50°C to +1500°C Good adhesion –to metal, brick and concreteFast re-assembly of components –Skin time of 5 minutes (20°C/ 50%RH)Can be over painted
Additional information
| Color | Beige |
|---|---|
| Content | 150 ml |
Application
KENT Exhaust Paste is a high temperature resistant sealant, specifically designed to permanently repair and seal joints, cracks and fissures in fireplaces, ovens and chimneys.It can also be used for repairing and assembling of vehicle exhaust systems.
Manuals
1. Ensure the surface is clean and free of loose rust, dirt and grease.2. Abrade the surface with medium emery paper.3. Extrude the paste into required area.4. The joint should be tooled within five minutes of application to ensure good contact between the sealant and the substrate. 5. Uncured material can be removed by wiping with a dampened cloth6. Run the engine at low speed until engine warms up. This will allow the paste to cure and form a gas tight seal.
Your challenge – our solutions
