Injector Release Agent
A powerful release agent for the removal of seized injectors.
Description
Fast acting release of seized injectors – reduces amount of work and thus costsVery slow solvent evaporation – provides intensive penetrationSlide-active PTFE particles – assists removal of the componentsFreezes the material down to -30ºC – faster acting20 cm extension straw – easy applicationFree of acid and silicones – bodyshop safe
Additional information
| Color | Translucent |
|---|---|
| Content | 500 ml |
Application
KENT Injector Release Agent enables a non-destructive removal of seized injectors from diesel engines and effectively removes carbon deposits, oil residues, gumming etc. The specific formulation of the active substances entails a cold shock down to -30 ºC. This extreme cooling causes microcracks on the injector‘s sealing ring and permits the active agent, with it‘s very slow evaporation solvent components, to penetrate faster and deeper. Existing rust crystals, moisture and any deposits will be infiltrated due to special additives. Glide-active PTFE particles ensure a good gliding property and ease the injector removal. KENT Injector Release Agent can also be used for the removal of seized spark plugs and glow plugs.
Instructions
1. Shake well before use.2. Remove coarse surface dirt accumulation mechanically, then spray liberally on the seat of the injector and allow to soak for approx. 30 – 45 minutes.3. Repeat the procedure as required and remove loosened dirt by using compressed air and a cloth.4. Remove parts with suitable tool.
Your challenge – our solutions
