Perforated Trim Masking Tape
Perforated Trim Masking Tapes uses a High Temperature Crepe Masking Tape with a pressure sensitive adhesive. This tape is a laminate of Crepe Masking Tape and Polyester Film which is perforated to aid dispensing.
Description
Perforated –No tools needed to cut the tapeLiner-less –Less wasteEasy Lifting Tab –Quick and easy to useOne size Fits All –Reduces inventory
Additional information
| Color | Beige |
|---|---|
| Content | 50 mm x 10 m |
Application
An ideal way to protect rubbers trims and body side mouldings during spraying.Pre-perforated for easy tear off and flexible to follow contours and tight curves.
Manuals
1. Choose area to be masked.2. Tear off a small section to mask a tight corner and tear the tape down to the plastic section and then slide in between the rubber trim and the bodywork.3. To mask along a straight section tear off a section no longer than 20cm and slide in and leaver back the trim so that a small gap is created. Make sure that the next piece overlaps the last piece.4. Mask as normal and paint.5. Allow paint to dry and remove all the masking material.6. Check edges and polish if necessary.
Your challenge – our solutions
