Plastic Dressing
Plastic dressing when applied to plastic is absorbed into the pores of the plastic and cures leaving an “as new” uniform dark colour film. Plastic Dressing is suitable for all exterior plastic Bumpers, bumper inserts, side trim, door mirror surrounds, spoilers, skirts, roof inserts and vinyl roofs.
Description
Silicone free –safe for bodyshopReconditions plastic –enhances cosmetic appearanceWeatherproof once cured –will not easily wash or weather offEconomical in use –value for moneyPleasant fragrance –re-odourises plasticsNon-harmful –user friendly
Additional information
| Color | White |
|---|---|
| Content | 400 ml |
Application
Due to the dust and dirt in Body Shops it is common for plastic trim to become ingrained with dirt, which leaves plastics looking faded and discoloured, even after they have been cleaned. It is necessary to return the vehicle to customers in an ‘as new’ condition. This leaves bodyshops with a particular problem as products typically used to enhance appearance often contain silicone so cannot be used. Plastic Dressing is a product designed to enhance the appearance of weathered plastics and vinyl’s by restoring the colour to a natural sheen. It contains no silicone so it is completely safe for use in bodyshop, and it is also non-harmful.
Manuals
1. Thoroughly clean all trim to be treated using KENT New All-Purpose Foam Cleaner. Remove any residual contamination with KENT Plastic repair cleaner.2. Spray product onto a clean cloth or damp sponge. Apply sparingly over the surface of the plastic, ensuring the entire area is covered.3. Allow 30 minutes for product to be touch dry. Drying will be accelerated in direct sunlight.4. Remove any unwanted application on body panels or glass with KENT New All-Purpose Foam Cleaner or Glass Kleen.
Your challenge – our solutions
