Powerlock
Very high-strength retaining compound and threadlocker, with excellent gap-filling properties.
Description
Green very high-strength retaining compound –designed for retention of parts with a clearance or interference fitExcellent gap-filling properties –up to 0.25 mmHigh temperature resistance –up to 180°CIncreased oil tolerance –locks assemblies even when not completely cleanPrimerless on active and passive metals –saves time in the maintenance and repair operationHigh chemical resistance to most industrial liquidsNon-hazardous –safe for the user and the environmentNSF P1 registered –for use in food-processing environment
Additional information
| Color | Green |
|---|---|
| Content | 50 ml |
Application
Powerlock is designed for the retention of parts with a clearance or interference fit and shows excellent performance for dynamic, axial and radial loads. Powerlock is ideal for repairing badly worn shafts on shaft mounted assemblies or for repairing badly worn housings around components such as bearings and metallic seals. Powerlock fills gaps up to 0.25 mm in fitting metal parts – active metals such as brass and copper, and passive metals such as stainless steel, aluminium and plated surfaces. The curing speed varies depending on the surface. For increasing the curing speed, use KENT Anaerobic Activator.Powerlock can be applied on surfaces presenting traces of cutting oils, lubricants and protection liquids.It is not recommended to use Powerlock for the permanent locking of copper assemblies when in contact with water above 40°C.
Manuals
1. Clean both parts to be assembled with KENT Soft Surface Cleaner. 2. If required, apply KENT Anaerobic Activator on both parts and allow 30 to 60 seconds to dry.3. Apply Powerlock on both parts.4. Assemble as required. Don’t move parts after assembling.5. Functional strength is achieved in 3 to 6 hours depending on the nature of the surface and the size of the thread. Allow 24 hours curing time in order to achieve full strength.
Your challenge – our solutions
