Proseal 303
Brushable and sprayable MS Polymer based sealant developed for body seam sealing, noise reduction coatings and OEM stone protection of sills, underbody and wheelhouses. Compatible with leading automotive paints.
Description
Isocyanates and solvents freeMedium to low viscosity –replicates the smooth OEM structure on sillsGood spray ability –easy to apply with little or no oversprayExcellent finish structure –replicates OEM finishRelatively fast skinning/cure speed –fast paint over & allows handling after short timeGood paint adhesion with leading automotive paint technologies
Additional information
| Color | Grey Black White Beige |
|---|---|
| Content | 290 ml |
Application
Proseal 303 has been developed to meet the needs of Body shops to replicate the distinctive finish of the sprayed seam sealers used by OEM’s in the manufacture of many vehicles. Together with the Multi Gun, a variety of finishes can be obtained to match the diverse styles of Volkswagen, Citroen, Renault and many far eastern vehicles. Application areas include sills, boot and rear panel areas and around front suspension turrets. The black version is ideal for applications where overpainting is not required e.g. underbody and wheelhouses.Proseal 303 also doubles as a general sealer, albeit of a higher viscosity than Proseal 404.N.B.: Apply paint system according to the advice of paint manufacturer. A compatibility test is recommended. KENT Epoxy Primer, KENT Graphene Primer or KENT Ultrafill 3 can be used as a barrier layer before painting (follow instructions in our TDS).
Instructions
1. Clean surface with KENT Acrysol or Soft Surface Cleaner and allow to dry.2. Spray Proseal with KENT Multigun, adjusting the pressure to suit the application (see gun instructions). 3. Paint, if required, once skin has formed (after app. 30 minutes in standard conditions). Paint within 4 hours. In case of a longer waiting time, it is necessary to slightly sand Proseal before painting.
Your challenge – our solutions
