SL500
A fast acting, penetrating grease for lubrication of general moving components subjected to high pressure, impact and vibration.
Description
Special formulation –thin while “spraying” for a good penetration and thick after “flash off” for a good protection and lubricationExcellent penetrant –gets to where lubricant is requiredTransparent appearance –invisible protectionMoisture repellent –protects against corrosionHigh adhesion –stays where it is neededHigh lubricity –reduces wear and friction
Additional information
| Color | Yellow / Transparent |
|---|---|
| Content | 500 ml 500 ml Easy straw |
Application
KENT SL85/SL500 is a lubricant based on a mixture of synthetic oil, mineral oil, tackifiers, anti wear-anti oxidation-, anti corrosion additives and PTFE.It‘s a spray grease with excellent penetrating ability and very high adhesion and designed for lubricating general moving components during the service schedule, such as:
Door hinges, check straps, door locks, bonnet and boot hinges and catches, pedal pivots, fuel cap locks, seat rails, control linkages, cables, chains (O/X/Z-ring) and much more.Once the propellant has flashed off, it leaves a high degree of both protection and lubricating properties.
Instructions
1. Shake well before use. 2. Clean the moving parts before application with a KENT degreaser (e.g. Soft Surface Cleaner or Acrysol) and dry with a cloth. 3. Spray from a short distance directly onto the moving parts of the component requiring lubricating.4. Allow the product to flow and let the solvents evaporate.5. Remove excess of lubrication.
Your challenge – our solutions
