Spot Primer
A quick drying, universal aerosol primer suitable for small sanded-through spots.
Description
Fast drying, excellent adhesion, easy sandability –Designed for sanded-trough stopsSpecial fomula –Good filling properties, good flexibility, good hardness.Contains zinc phosphate –Can be used directly on metal.Good anticorrosion properties –Safe in use on metalFor small areas, such as sanded-through spots –Use in the paint booth
Additional information
| Color | Grey Black White |
|---|---|
| Content | 400 ml |
Application
A quick-drying universal aerosol primer that has been developed to make small spot repairs on virtually any surface, easier and faster to carry out. It is highly cost-effective as paint waste is reduced and time is saved
Instructions
1. Remove any surface contamination prior to the application using Acrysol or Panel Degreaser
2. Shake can for several minutes after the mixing ball has loosened.
3. Spray with a distance of approx. 25-30 cm, cross wise, 2 or 3 even coats.
4. Allow for a 3-5 minutes flash-off time between the coats, at 20°C.
5. Invert aerosol and depress nozzle after use for 2-3 seconds, to allow the propellant to clean the nozzle.
6. Allow 10-15 minutes at 20°C before sanding.
7. Sand slightly before application of the topcoat, with P500 grit dry or P1000 grit wet.
Your challenge – our solutions
