Super Bond Gel
A high viscosity instant adhesive for bonding most porous materials or for application on vertical surfaces
Description
Strong performances –high tensile and shear strengthsHigh viscosity gel –ideal for application on vertical surfaces and filling small gapsImproved formula –in a high quality bottle for a long shelf lifeNo blooming –for a perfect finish on visible repairs
Additional information
| Color | Transparent |
|---|---|
| Content | 1 piece 10 g |
Application
Super Bond Gel is a fast-curing high viscosity cyanoacrylate adhesive. It has been formulated to achieve high bond strength on porous and irregular materials, such as wood, cork, cardboard, paper, fabric, leather, stone and ceramic.The high viscosity of Super Bond Gel also allows a minimised dripping on vertical surfaces and larger gap filling, for the repair of small cracks and holes. Apply Super Bond Activator to cure the exposed adhesive.Super Bond Gel doesn’t bloom and is therefore well suited for cosmetic applications or visible repairs.
Manuals
1. For best results, surfaces to be bonded must be clean, free from dirt, waxes, oils, etc., using KENT Acrysol or Soft Surface Cleaner.2.Protect your hands using gloves, to avoid fingers to stick together.3. Apply sparingly to one surface only.4. Bring the surfaces together immediately, taking care to ensure the correct alignment.5. Apply firm pressure to ensure that the adhesive spreads into a thin film.6. Do not disturb or re-align until the curing is achieved (normally in a few seconds).7. Any surplus liquid adhesive may be removed with KENT Acrysol or Soft Surface Cleaner.8. Always close cap after use, ensuring it is correctly secured, and wipe the tip clean.Use KENT Super Bond Activator to improve bond strength, e.g. for hard-to-bond materials, or to accelerate curing process. Please refer to the technical data sheet for the instructions for use.
Your challenge – our solutions
