UNIVERSAL AC DYE
A dye for use in conjunction with a UV lamp in identifying leak areas in Air Conditioning systems
Description
Easy to use –No lengthy training requiredFast and easy clean up –Saves timeMeets SAE J-2297 –Conforms to approved specificationReduces downtime and operation costs –saves moneyRemoves guesswork –Saves time and labour.
Additional information
| Color | Dark brown |
|---|---|
| Content | 240 ml |
Application
When applied to an air conditioning system, Air Con Dye will mix with the refrigerant and circulate throughout the system. At the area of the leak, a small amount of UV dye will escape and stain the area with a fluorescent dye, allowing the operator to see this with the aid of the UV lamp and enhancing glasses. A repair can then be conducted to the affected area. Universal A/C dye is compatible with all refrigerants up to R134A.
Manuals
The injection gun injects the dye into the A/C system without the need to evacuate any refrigerant. To use, proceed with the following steps:1. Set up the UV injection gun and hose as per the instructions on the UV Gun/Hose Customer Data Sheet.
Remove the drip cap from the R-134a adapter then connect the gun to the low side port of the A/C system. (Fig.4)2. Inject dye into the A/C system by squeezing the trigger twice. This is enough dye for a typical vehicle. For smaller systems, squeeze the trigger only once.3. Disconnect the adapter from A/C system then attach the drip cap to the adapter hose.
Your challenge – our solutions
