Waxcoat
A cavity wax coating, specifically developed to penetrate even into the most inaccessible areas available.
Description
Film thickness of 20 – 40 microns –Excellent resistance to common road conditionsExcellent application system –Allows difficult areas to be accessedLow viscosity liquid –Penetrates and coats difficult areasCompatible with recently painted surfaces –Will not damage fresh cured paint, no comebacksQuick drying –Saves timeAdheres to all common substrates –Can be used throughout vehicle
Additional information
| Color | Brown |
|---|---|
| Content | 500 ml |
Application
Waxcoat has been developed to provide a final layer of protection against water and other contaminants such as road salt which will cause rust and other damage in out of sight areas within the vehicle. As its name suggests, it leaves a thick film of concentrated wax to prevent these contaminants attacking the metal work.Waxcoat can be used to coat even the most inaccessible areas, using either the standard nozzle or the supplied extension tube. It is ideal for doors, bonnets, boot lids, tailgates, box sections, sill interiors, boot floors, foot wells and for rust protection of metal plates.
Manuals
1. Where possible ensure surfaces are clean, dry and degreased using KENT Acrysol or KENT Speedy 500.2. Shake aerosol well before use.3. Spray product and build up thickness as required.4. Can be used on recently painted surfaces. Do not spray on engine, brakes or exhaust.5. If necessary remove using KENT Acrysol or KENT Speedy 500.
Your challenge – our solutions
